Vacuum Desiccators
Trajan Scientific HPLC Reverse Phase Protecol Polar 1/EA
C18P x 3 m particle size x 120 pore size 150 mm length x 4 6 mm ID PEEK coated with guard ProteCol HPLC column
Chemglass Life Sciences Desiccator, 223.5mm I.D., 5.8L, Large Top with 24/29 Stpk, 190mm Plate Dia, Complete
Desiccator, 200mm I.D., 5.8L, Large Top with 24/29 Stpk, 190mm Plate Dia, Complete. This 5.8L Pyrex desiccator has a rugged 24/29 standard taper stopcock with tooled hose connections that serve as the vacuum inlet. It is designed so that its manipulation is not affected by the vacuum. To introduce vacuum into the desiccator, loosen the stopcock to disengage the PTFE plug from contact with the glass. A half turn from this position closes the desiccator. This design eliminates the need for grease. The tubulation O.D. is approximately 10mm. Approximate bowl volume capacity is 5,800mL. For replacement bowl see CG-8266-R200LO. For replacement stopcock see CG-8272-RSTPK. Please Note: Plate is not supplied and must be purchased seperately. WARNING: Do Not Heat Or Subject To Pressure. Rated 1-Atmosphere Vacuum.
Research Products International Corp Transpartent Vacuum Desiccator, 7 3/4 x 10 1/4 Inches
Degas liquids quickly and easily in the laboratory or classroom with this small plastic vacuum desiccator. These strong, shatterproof units provide dry storage and protection for sensitive products.
Tapered polypropylene stopcock with PTFE plug accepts tubing with ¼ to ⅜” I.D. and allows a controlled entrance of air preventing unnecessary turbulence
Neoprene O-ring assures a tight seal down to 0˚C without the need for grease (ring will not be harmed if grease is used) ‘Flat Dome,&rsquo.WARNING This product can expose you to chemicals including Choloprene and Bisphenol-A , which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Chemglass Life Sciences Desiccator, Polycarbonate, Size C
Clear polycarbonate desiccator having extra heavy walls to eliminate the danger of implosion. Desiccator will hold a vacuum of 740mm of Hg (29”) for a period of 24 hours. Space saving design of the desiccator dome provides maximum interior clearances, giving an average of 13% greater interior volume than hemispherical domes. The supplied polypropylene stopcock has a PTFE plug which turns easily, allowing a slow, gentle entrance of air to prevent unnecessary turbulence and crucible damage. Stopcock port accepts 1/4” I.D. tubing. Supplied complete with a neoprene o-ring unaffected by temperatures down to 0ºC. Polypropylene plate that is supplied with the desiccator is 1/8” thick with 1/8” perforations for air transfer. The plate rests on the retaining ledge of the bottom section and has a center hole for easy removal.Plate Diameter: 230mmInside Diameter: 240mmClearance Above Plate: 197mmOverall Height: 311mmFlange O.D.: 273mm
Andwin Scientific Equipment: Desiccators and Desiccants: Vacuum Desiccators: 240mm Inside Dia., 311mm Overall Height, each
Equipment: Desiccators and Desiccants: Vacuum Desiccators: 240mm Inside Dia., 311mm Overall Height, each
Chemglass Life Sciences Desiccator, 172mm I.D., 2.4L, Small Top with 24/29 Stpk, 140mm Plate Dia, Complete
Desiccator, 150mm I.D., 2.4L, Small Top with 24/29 Stpk, 140mm Plate Dia, Complete. This 2.4L Pyrex desiccator has a rugged 24/29 standard taper stopcock with tooled hose connections that serve as the vacuum inlet. It is designed so that its manipulation is not affected by the vacuum. To introduce vacuum into the desiccator, loosen the stopcock to disengage the PTFE plug from contact with the glass. A half turn from this position closes the desiccator. This design eliminates the need for grease. The tubulation O.D. is approximately 10mm. Approximate bowl volume capacity is 2,400mL. For replacement bowl see CG-8266-R150LO. For replacement stopcock see CG-8272-RSTPK. Please Note: Plate is not supplied and must be purchased seperately. WARNING: Do Not Heat Or Subject To Pressure. Rated 1-Atmosphere Vacuum.
Electron Microscopy Sciences Small Vacuum Desiccator
All clear polycarbonate. Features large interior volume, extra heavy walls, stopcock with a "PTFE" plug, ribbed knob, neoprene "O" ring, and full visibility.
Flange O.D.: 71 mm
I.D.: 149 mm
Plate size: 140 mm
Overall height: 206 mm
Clearance above plate: 121 mm
Andwin Scientific SECADOR 4.0 Autodesiccator Cabinbet - Vertical: SECADOR 4.0 Autodesiccator Vertical, Clear, 115v, each
Equipment: Desiccators and Desiccants: SECADOR Desiccator Cabinets: SECADOR 4.0 Autodesiccator Cabinbet - Vertical: SECADOR 4.0 Autodesiccator Vertical, Clear, 115v, each
Electron Microscopy Sciences Vacuum Bell Jar & Plate
Good for vacuum drying and degassing procedures. The chamber is made from a clear polycarbonate allowing for full visibility. Its polypropylene stopcock has a "PTFE" plug and it accepts 1/4" (6.4 mm) I.D. tubing. The chamber measures: 7 7/8" (20cm) I.D.; inside maximum height is 4 3/8" (11cm); plate is 1 3/4" (4.4cm) H x 9 1/8" (23.2cm) in diameter.
Electron Microscopy Sciences Lab Companion™ Vacuum Desiccator Cabinet, 35 L UV Amber, 16½x15⅝x15"
These high-quality vacuum desiccators provide vacuum integrity lasting three times longer than the average vacuum desiccator resulting in lower maintenance and greater peace of mind. Able to maintain 29"-Hg vacuum for over 72 hours at room temperature, they stay gastight allowing reliable storage, creation of anaerobic environments, degassing of materials or vacuum drying of samples over extended periods.
Capacity: 35 L
Color: UV Amber
Shelves Included/Max: 3/5
Max Weight/shelf: 5 kg
Dimensions: 16½x15⅝x15"
Electron Microscopy Sciences Lab Companion™ Vacuum Desiccator Round, 20 L UV Amber, 13⅞x15¾
These high-quality vacuum desiccators provide vacuum integrity lasting three times longer than the average vacuum desiccator resulting in lower maintenance and greater peace of mind. Able to maintain 29"-Hg vacuum for over 72 hours at room temperature, they stay gastight allowing reliable storage, creation of anaerobic environments, degassing of materials or vacuum drying of samples over extended periods.
Capacity: 20 L
Color: UV Amber
Shelves Included/Max: 1/1
Max Weight/shelf: 25 kg
Dimensions: 13⅞x15¾
Electron Microscopy Sciences Lab Companion™ Vacuum Desiccator Cabinet, 11 L Clear, 12⅝x11¼x10⅝"
These high-quality vacuum desiccators provide vacuum integrity lasting three times longer than the average vacuum desiccator resulting in lower maintenance and greater peace of mind. Able to maintain 29"-Hg vacuum for over 72 hours at room temperature, they stay gastight allowing reliable storage, creation of anaerobic environments, degassing of materials or vacuum drying of samples over extended periods.
Capacity: 11 L
Color: Clear
Shelves Included/Max: 2/4
Max Weight/shelf: 3 kg
Dimensions: 12⅝x11¼x10⅝"